Henry Scope Mount Big Boy 2nd Generation 1-Pc #BB-RSM

To optimize accuracy, Henry scope mounts are available on this page for the following models: H001, H002, H003, H004, H005 and H006G/H012G/X. If your model is not listed, please skip to the bottom of the page. Instructions on installation of the scope mount is provided in the packaging. All Henry scope mounts accept Weaver style detachable 1" top mount rings (rings not included). Picatinny-style rails in particular accept Weaver or Picatinny style top mount rings as well as red dots. Screws are included with the mounts.

Note to Big Boy Owners (H006/H012 Series)

Previous production from pre-2011 (or 1st Generation) Brass Big Boy rifles were drilled and tapped on the barrel under the rear sight, they were NOT drilled/tapped on the receiver. You will need to use BB-CSM for 1st Generation H006 Brass Big Boy series.

In 2011 we began shipping 2nd Generation Brass Big Boy rifles which feature receivers that are drilled and tapped for the scope mount. For 2nd Generation Brass Big Boys you can use either the BB-RSM (Weaver-style) or BB-RSMP (Picatinny-style) rails. 2nd Generation Brass Big Boys start with the following serial numbers:

H006 = BB0047222
H006M = BB0015530M
H006C = BB0021188C

ALL H012 Steel Big Boy Series guns are 2nd Generation.

The BB-RSM measures out at approximately 4 5/8" with 2 fixed slots.